IP6000

IP6000 series positioner is mounted on pneumatic actuators.
It's used to control air intake and exhaust of the pneumatic actuators to drive the valve position to the set point by calculating both data from 4-20mA DC signal and feedback position.

Easy to install, one-key auto-tune calibration
Mature and reliable piezo module, imported from Germany
Numerous functions can be activated(e.g. characteristic curves and limits)

Data download Immediate consultation

Technical specification

Technical data

Mechanical Dimensions

Structure

Pneumatic connections

Electrical connections

Wiring diagram

Principle Block Diagram

Mounting components

Combination mode

Installation type
Acting type
Explosion proof
Feedback signal
HART
Mounting kit & lever
Pressure gauge
Power off state
Min. ambient temp

Normal linear（L）
Remote linear*（FL）
Normal rotary（R）
Remote rotary*（FR）
Separate*（S）

Single acting（S ）
Double acting（D）

Non explosion（n）
Ex ia IIC T4/T6 Ga（ i）
Ex d IIC T6 Gb（d）

No（0）
Yes（1）

No（0）
Yes（1）

No（0）
Linear（1）
Rotary（2）

No（0）
Yes（1）

Safe（S）
Freeze（F）

-20℃（N）
-40℃（L）

In the installation type options, the options marked with * (FL, FR and S) do NOT support explosion proof option d (Ex d IIC T6 Gb).
* marked option S (separate type) does NOT support the Min. ambient temperature option L (-40℃).

Technical Data

Enclosure material	Aluminum
Pressure gauge block material	Aluminum, anodized
Input signal	Input resistance: 120Ω Limit voltage: 28V
Output signal	Feedback type: 2-wire 4~20mA signal, internal resistance 120Ω
Digital communication protocol	HART 7
Minimum operating current	3.8mA
Steady state air consumption	≤ 0.4 L/min
Stroke range	Default linear type: 10~100mm Default rotary type: 30~100° Separate type: 5~25mm Optional mounting bracket: Hard connection or soft connection Note: The stroke range of remote type is the same as that of default type
Pneumatic data	Air quality meets ISO 8573-1 standard Pressure range: 1.4~7bar(20.3~101.5psi) Solid particle size and density: Grade 3 Pressure dew point: Class 3 (minimum 20K (36°F) lower than the ambient temperature) Oil content: Class 3
Vibration resistance	0.15mm, 10Hz-60Hz, 20 cycle/axis 20m/s2, 60Hz-500Hz, 20 cycle/axis Recommended range for control valve≤20 m/s², no resonance peak
Electrical connection	M20×1.5
Pneumatical connection	G1/4
Protection class	IP66
Basic error & Hysteresis error	≤ 1%
Ambient temperature	Default type: -20℃ ~ +70℃ Low temperature type: -40℃ ~ +70℃ Highest explosion proof temperature of Ex ia type for T4 area is +60℃ Highest explosion proof temperature of Ex ia type for T4 area is +60℃
Explosion-proof grade and applicable zone	Ex ia IIC T4/T6 Ga apply to Zone 0, Zone 1, Zone 2

Pneumatic

Description
SUP

Air

supply input
OUT1

Pilot air outlet 1
OUT2

Pilot air outlet 2

Electrical

Description
IN+

4-20 mA input signal +
IN-

4-20 mA input signal -
OUT+

Feedback signal module 18-30 V DC+
OUT-

Feedback signal module 4-20 mA output

Ex ia linear type
Ex ia remote linear type
Ex ia default rotary type
Ex ia remote rotary type

香蕉久草,香蕉丝瓜草莓樱桃草莓榴莲污,无限看片的免费视频动漫版,中国bgmbgmbgm老太太70在线

香蕉久草,香蕉丝瓜草莓樱桃草莓榴莲污,无限看片的免费视频动漫版,中国bgmbgmbgm老太太70在线